Hi, you are logged in as , if you are not , please click here

HND Electrical and Electronic Engineering

Distinction between HNC and HND

HNC you must complete a minimum of 125 credits including the core modules with a maximum of 50 credits at level 5.

HND you must complete a minimum of 245 credits including the core modules with a minimum of 125 credits at level 5.

Core Modules (Level 4) - Electrical and Electronic Engineering

Analytical Methods for Engineers (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Analytical Methods for Engineers (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

The aim of this module is to provide the fundamental analytical knowledge and techniques needed to successfully complete the core modules of Higher National Engineering programmes. It is also intended as a base for the further study of analytical methods and mathematics, needed for the more advanced option modules. This module has been designed to enable students to use fundamental algebra, trigonometry, calculus, statistics and probability, for the analysis, modelling and solution of realistic engineering problems at Higher National level.

Assessment
One single component of assessment, comprising four elements, in the form of an in-course assessment. Each assessment is equally weighted and comprises a set of, on average 5-10 short answer questions


Module Tutor: Stephen Brown/David Craddock
Tel: +44 (0)1642 384444/342559
Email: s.brown@tees.ac.uk or d.craddock@tees.ac.uk

Read More
Engineering Science (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Engineering Science (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module investigates a number of mechanical and electrical scientific principles which underpin the design and operation of engineering systems. It is a broad-based unit, covering both mechanical and electrical principles. Its intention is to give an overview which will provide the basis for further study in specialist areas of engineering.

Assessment
One single component of assessment, comprising four elements, in the form of an in-course assessment. Each assessment is equally weighted and comprises a set of, on average 5-10 short answer questions.

Module Tutor: David Wishart
Tel: +44 (0)1642 738215
Email: d.wishart@tees.ac.uk

Read More

Core Modules (Level 5) - Electrical and Electronic Engineering

Electrical and Electronic Principles (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Electrical and Electronic Principles (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module provides students with an understanding of circuit theory and how to apply this to simple circuits. The topics covered will include circuit theory, two port networks, complex waves and transients in ac circuits.

Assessment
One single component of assessment, comprising four elements equally weighted, in the form of an in-course assessment. Each assessment comprises a set of, on average 5-10 short answer questions.

Module Tutor: Derek Casson
Tel: +44 (0)1642 342526
Email:
d.casson@tees.ac.uk

Read More
Project (20 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Project (20 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module presents the opportunity for students to use the knowledge and skills they have developed at work and in their programme of studies, in the definition, management and completion of a work-related project, including the presentation of their findings to an appropriate audience. The module thereby aims to integrate the skills and knowledge developed in other modules of the course within a major piece of work that reflects the type of performance expected of a higher technician at work.The student is advised to study this module until last and is advised to use a ‘real’ project based on their own workplace where this is possible.

Assessment
One single component of assessment comprising three equally weighted elements:

  • Element 1 comprises a logbook or project diary documenting the progress of the project
  • Element 2 comprises a project report of approximately 3000 words
  • Element 3 oral presentation of the project 5-10 mins


Module Tutor: Derek Casson
Tel: +44 (0)1642 342526
Email: d.casson@tees.ac.uk

Read More

Elective Modules (Level 4) - Electrical and Electronic Engineering

Applications of Pneumatics and Hydraulics (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Applications of Pneumatics and Hydraulics (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module will provide students with a knowledge and understanding of fluid power systems in modern industry by investigating pneumatic and hydraulic diagrams, examining the characteristics of components and equipment, and evaluating the applications of pneumatics and hydraulics.

Assessment
Evidence will be provided from a single component of assessment, comprising three elements, in the form of an in-course assessment. Each assessment comprises a set of, on average 5-10 short answer questions which are related to the sequence and content of the lessons provided within the learning materials.

Module Tutor: David Craddock
Tel: +44 (0)1642 342559
Email: d.craddock@tees.ac.uk

Read More
Digital and Analogue devices and circuits (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Digital and Analogue devices and circuits (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module provides students with an understanding of a range of electronic devices and circuits used in modern electronic systems. The electronic circuits will include power supplies, operational amplifiers and digital circuits.

Assessment
One single component of assessment, comprising three equally weighted elements, in the form of an in-course assessment.

Module Tutor: Derek Casson
Tel: +44 (0)1642 342526
Email:
d.casson@tees.ac.uk 

Read More
Distributed Control Systems (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Distributed Control Systems (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

The aim of this module is to investigate Distributed Control System concepts and their applications in engineering. It focuses on the design characteristics and internal architecture of Distributed Control Systems and how they interact.

Assessment
Evidence will be provided from a single component of assessment, comprising four elements, equally weighted, in the form of an in-course assessment. Each assessment comprises a set of, on average 5-10 short answer questions which are related to the sequence and content of the lessons provided within the learning materials.

Module Tutor: Derek Wishart
Tel: +44 (0)1642 738215
Email: d.wishart@tees.ac.uk

Read More
Electrical machines (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Electrical machines (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module covers the fundamentals and relevant aspects of electrical d.c. and a.c. machines and power transformers as industrial electrical plant.

Module Tutor: Chrs Ogwumike
Tel: +44 (0)1642 738099
Email: c.ogwumike@tees.ac.uk

Read More
Engineering Applications (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Engineering Applications (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

In this module students identify individual tasks, activities, or programmes of work, whether administrative, theoretical, practical or supervisory, that they have undertaken as part of their daily working lives and show how those activities have contributed to their professional engineering development. In so doing the module requires that the student document key aspect of the development to date and to critically appraise their career journey, identifying areas of their experience that may be under-developed and producing an action plan for their ongoing professional development.

Assessment
One single component of assessment, comprising four equally weighted elements, in the form of an in-course assessment comprising short project style reports of approximately 500 words each that detail the professional development activities that the student has undertaken in the workplace and show how each activity has contributed to the student’s progress and the advancement of their abilities in engineering; technically, managerially, and personally.

Module Tutor: David Craddock
Tel: +44 (0)1642 342559
Email: d.craddock@tees.ac.uk

Read More
Mechatronics Systems Principles (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Mechatronics Systems Principles (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

The aim of the module is to introduce the student to the necessary skills and principles which underpin a range of mechatronic systems. The module will encompass small single component systems as well as larger systems integrating components from different engineering disciplines. The module will deal with the control concepts used in mechatronic systems and will focus on system design and maintenance. The approach will be broad-based, to reflect the fact that mechatronics is, by its nature, multidisciplinary and not confined to a single specialised discipline. The intention is to encourage the student to recognise a system, not as an interconnection of different parts but as an integrated whole.

Assessment
The in-course assessment will take the form of a series of elements of assessment generally comprising 5-10 short answer questions. It will assess the ability to research, interpret and analyse a problem and to produce a workable solution.

Module Tutor: David Craddock
Tel: +44 (0)1642 342559
Email: d.craddock@tees.ac.uk

Read More
Microprocessor Systems (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Microprocessor Systems (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module will provide students with an understanding of microprocessor-based systems and their use in instrumentation/control/communication systems. Students will study the practical aspects of device selection, programming and the interfacing of external peripheral devices. The module also introduces students to the development cycle of specification, design, build, program, test and evaluation.

Module Tutor: Derek Casson
Tel: +44 (0)1642 342526
Email:
d.casson@tees.ac.uk

Read More
Programmable Logic Controllers (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Programmable Logic Controllers (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module investigates programmable logic controller (PLC) concepts and their applications in engineering. It focuses on the design characteristics and internal architecture of programmable logic control systems, the signals which are used and the programming techniques.

Assessment
One single component of assessment, comprising four equally weighted elements, in the form of an in-course assessment. Element 1 comprises a set of, on average 5-10 short answer questions.

Module Tutor: David Wishart
Tel: +44 (0)1642 738215
Email: d.wishart@tees.ac.uk

Read More
Semiconductor Structure and Fabrication (15 credits) - HND Electrical and Electronic Engineering

Semiconductor Structure and Fabrication (15 credits) - HND Electrical and Electronic Engineering

Description

This module will be of value if you are working or have an interest in the semiconductor industry. It describes the main process steps involved in the fabrication of semiconductor devices and the equipment associated with each process step, together with the required operating conditions and parameters. The structure, properties and operation of the illustrative semiconductor devices (diodes, bipolar and field-effect transistors, logic gates) are described in so far as required for a more complete understanding of their fabrication requirements. The importance of good clean room practice and the effects of contamination upon yield and reliability are also discussed.

Module Tutor: Derek Casson
Tel: +44 (0)1642 342526
Email:
d.casson@tees.ac.uk

Read More

Elective Modules (Level 5) - Electrical and Electronic Engineering

Business Management Techniques (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Business Management Techniques (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

The aims of the module are to provide an introduction to the role, principles and application of management accounting in the planning, decision making and control of engineering projects, and to develop an awareness of the needs of project planning and scheduling; to develop numerical skills in the context of management accounting and to be able to communicate quantitative and qualitative information in a variety of contexts.

Assessment
The in-course assessment will take the form of a series of elements of assessment generally comprising 5-10 questions. It will assess their ability to research, interpret and analyse a problem and to produce a workable solution.

Module Tutor: Stephen Brown
Tel: +44 (0)1642 384444
Email: s.brown@tees.ac.uk

Read More
Combinational and Sequential Logic (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Combinational and Sequential Logic (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module develops the theory of digital techniques, to more practical and complex applications of both combinational and sequential logic. Students will design and test circuits selecting appropriate components using information from manufacturers data sheets. The loan of a practical kit allows students to build and test circuits using logic gates and flip flops.

Assessment
Evidence will be provided from a single component of assessment, comprising four elements, equally weighted, in the form of an in-course assessment.

Module tutor: Derek Casson
Tel: +44 (0)1642 342526 
Email: d.casson@tees.ac.uk

Read More
Control Systems and Automation (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Control Systems and Automation (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module develops an understanding of basic mechanisms and performance measures used for the implementation and analysis of process control systems that apply across the engineering disciplines.AssessmentElement 1, 2 and 3 consists of a small number of questions which require a blend of short descriptive answers including the reproduction of diagrams; numerical calculations requiring the interpretation of technical descriptions and the identification and use of relevant formulae, tables and charts.

Module Tutor: Stephen Brown
Tel: +44 (0)1642 384444
Email: s.brown@tees.ac.uk

Read More
Electrical Supply and Distribution (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Electrical Supply and Distribution (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module develops the principles and practice involved in the design of high and low voltage supply, transmission and distribution systems. It introduces the analysis of such systems and how to coordinate the protection and apply tariffs for such systems. The roles of generators, transformers, isolators and protection devices in electrical supply systems are investigated.

Module Tutor: Chrs Ogwumike
Tel: +44 (0)1642 738099
Email: c.ogwumike@tees.ac.uk

Read More
Electrical Systems Protection (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Electrical Systems Protection (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module analyses electrical supply systems with a view to selecting and coordinating system protection equipment. It shows how to analyse and resolve simple power systems into one-line impedance circuits and evaluate fault levels. It examines the role of current transformers and protection relays in electrical system protection and how to apply the principles of earthing, according to the IEE wiring regulations, to typical industrial electrical installations.

Module Tutor: Chrs Ogwumike
Tel: +44 (0)1642 738099
Email: c.ogwumike@tees.ac.uk

Read More
Electromagnetic Compatibility (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Electromagnetic Compatibility (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module provides electronic and electrical technicians and engineers with the underpinning theoretical knowledge and analysis tools for solving problems involving electromagnetic interference and addressing electromagnetic compatibility issues. The module covers induction by crosstalk and electromagnetic fields as well as the hazards posed by electrostatic discharge. Consideration is given to circuit board design and layout, grounding and the special problems arising from digital circuits

Assessment
Evidence will be provided from a single component of assessment, comprising four, equally weighted, elements equally weighted, in the form of an in-course assessment.

Module tutor: Derek Casson
Tel: +44 (0)1642 342526 
Email: d.casson@tees.ac.uk

Read More
Electronics (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Electronics (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module provides students with an understanding of analogue electronics topics including signals, noise, amplifiers, feedback and oscillators. It places particular emphasis on the use computer simulation and modern circuit analysis techniques and the use of manufacturers’ data. The module will include the loan of a practical kit to allow the students to design, build and test a series of circuits.

Assessment
Evidence will be provided from a single component of assessment, comprising four elements, equally weighted, in the form of an in-course assessment.

Module tutor: Derek Casson
Tel: +44 (0)1642 342526 
Email: d.casson@tees.ac.uk

Read More
Engineering Design (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Engineering Design (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module gives students an opportunity to experience the process of carrying out a design project and the production of a design report containing specifications in accordance with given customer requirements. A key aim of the module will be to enable students to appreciate that design involves synthesising parameters which affect the eventual design solution.

Assessment
Element 1, which will take the form of a design specification, will cover the key elements of design, the selection of a design method, and justification for it.

Element 2 will cover the selection of appropriate computer-based technology and the application of a range of communication methods in the production and presentation of a design report


Module Tutor: David Craddock
Tel: +44 (0)1642 342559
Email: d.craddock@tees.ac.uk

Read More
Operational Amplifiers (15 credits)  - HND Electrical and Electronic Engineering  / AOHND-OL

Operational Amplifiers (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

The operational amplifier is the most widely used analogue integrated circuit. This module investigates and develops an understanding of the applications of this versatile integrated circuit. The module provides design examples that can be emulated by computer circuit simulation software and also includes the loan of a practical kit on which the circuits can be built and tested.

Assessment
Evidence will be provided from a single component of assessment, comprising four elements, equally weighted, in the form of an in-course assessment.

Module tutor: Derek Casson
Tel: +44 (0)1642 342526 
Email: d.casson@tees.ac.uk

Read More
Safety Engineering (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Safety Engineering (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module covers the fundamentals of contemporary Safety Engineering as applied to industrial processes. It consists of an introduction to the terminology, the nature and treatment of hazards, hazard analysis, risk assessment, emergency procedures and the application of protective measures associated with various hazards The main aims of the module are to provide a firm foundation for work in Safety Engineering and to act a basis for more advanced studies of safety practices.

Assessment
The in-course assessment will take the form of a series of elements of assessment generally comprising 5-10 questions designed to assess the students’ ability to investigate, interpret and analyse a problem and to produce a workable solution.

Module Tutor: Stephen Brown
Tel: +44 (0)1642 384444
Email: s.brown@tees.ac.uk

Read More
Semiconductor Physical Electronics (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Semiconductor Physical Electronics (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module develops an understanding of the conduction process in metals and in intrinsic and doped semiconductors. It describes and analyses the behaviour of the semiconductor junction and the operation of the junction diode from a physical electronics view point. The module then goes on to describe and analyse the behaviour of bipolar and field effect transistors. Practical devices and circuits and device ratings and characteristics are also discussed. The module is of relevance to all those involved in the semiconductor industry and especially to those involved in the manufacture and testing of semiconductor devices.

Module tutor: Derek Casson
Tel: +44 (0)1642 342526 
Email: d.casson@tees.ac.uk

Read More
Statistical Process Control (15 credits) - HND Electrical and Electronic Engineering  / AOHND-OL

Statistical Process Control (15 credits) - HND Electrical and Electronic Engineering / AOHND-OL

Description

This module will provide you with background knowledge and understanding of Statistical Process Control by explaining its underpinning statistical methods and providing the essential key tools used in SPC such as Pareto Analysis, Control Charts and inspection and sampling techniques. It is also shown how the method of SPC is applied in quality management techniques such as Six Sigma.

Module tutor: Derek Casson
Tel: +44 (0)1642 342526 
Email: d.casson@tees.ac.uk

Read More